2VV.
Creating innovative solutions for you and your business since 1995.
6.4.4 – CONNECTING THE INTAKE AND EXHAUST UNITS
If installed, the intake and an exhaust units are controlled from the same control panel.
The control panel must be connected to the intake unit, as detailed below.
The regulators of both units are connected with a communication cable.
- plug one end of the data cable to the connector on the electronic board of the exhaust unit
- the other, to a connector on the electronic board of the intake unit. It doesn’t matter which.
PLEASE NOTE!
The main power cords are routed to each unit separately.
INTAKE UNIT
EXHAUST UNIT
A
G
K
UTP
-c
at c
ab
le
UTP-cable
INTAKE UNIT MASTER
EXHAUST UNIT
The UPT data cable is not included