background image

23

Regulatory Information

Electrical

AC Adapter

The AC adapter is designed to ensure your personal safety and to be compatible with this equipment. Please follow these guidelines:

• Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet.

• Allow adequate ventilation around the adapter. Avoid locations with restricted airflow.

• Connect the adapter to a proper power source. Voltage and grounding requirements are found on the product case and/or 
packaging.

• Do not use the adapter if the cord becomes damaged.

• Do not attempt to service the adapter. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess 
moisture.

Telecommunication Cord

CAUTION:

 To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord.

Location – Electrical Considerations

WARNING:

  The electrical cord of this product must be plugged into a properly grounded outlet or adapter.  Failure to comply could 

result in an electric shock hazard.  If you do not know whether your outlet or adapter is properly grounded, you should consult a 
licensed electrician.

CAUTION:

 Due to risk of electrical shock or terminal damage, do not use the terminal near water, including a bathtub, wash bowl, 

kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Also, avoid using this product during electrical storms. Avoid 
locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air 
conditioners, neon signs, high-frequency or magnetic security devices, or electric motors).

Equipment

Repairs

Do not, under any circumstances, attempt any service, adjustments, or repairs on this equipment. Instead, contact your local 2Wire 
distributor or service provider for assistance. Failure to comply may void the product warranty.

Location – Environmental Considerations

Do not plug the power pack into an outdoor outlet or operate the terminal outdoors. It is not waterproof or dustproof, and is for indoor 
use only. Any damage to the unit from exposure to rain or dust may void your warranty.

Do not use the terminal where there is high heat, dust, humidity, moisture, or caustic chemicals or oils. Keep the gateway away from 
direct sunlight and anything that radiates heat, such as a stove or a motor.

Declaration of Conformity 

FCC Compliance

The following device has been tested and certified as compliant with the regulations and guidelines set forth in Part 68 of FCC

Rules:

Manufacturer:

 2Wire, 

Inc.

Model:

 2701HGV-W

Part 15 of FCC Rules

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause undesired operation.

Summary of Contents for 2701HGV-W































Reviews: