12
4. Select the
Enable Password Protection
checkbox.
Note:
Make sure to select this checkbox or your password will not save.
Your Telecom gateway is preconfigured with a default “Administrator” password. The custom
password setup on the gateway is
admin
5. Select the password option:
- When
Use Default System password
is selected, no further action is required, go to
Step 8
.
- When
Create or Edit a Custom Password
is selected, continue with the next step.
Note:
The default system password is printed on the gateway back cover.
Figure 7: Location of Default Password
6. Enter the current password
admin
into the Enter Current Password field
7. Enter the new password in the
Enter New Password
field.
Note:
The password is case-sensitive and can contain a maximum of 31 alpha-numeric
characters with no spaces.
8. Confirm the new password in the
Confirm New Password
field.
Note:
Although it is optional, it is strongly recommended that you enter a password hint to
remind you if you forget your password.
9. Click
Save
; your password appears in
System Password
field as Custom: ***** and is displayed on
the
System Information
page (See
Figure 5
).