66
6. Enter information in the following fields:
-
Router Address
: This is the IP address of your gateway used for all communication on your
local devices.
-
Subnet Mask
: This is the subnet mask used for all communication on your local devices (the
default is 255.255.255.0).
-
First DHCP Address
: The first IP address in the DHCP address pool that you will be
distributing over the private network.
-
Last DHCP Address
: The last IP address in the DHCP address pool that you will be
distributing over the private network.
7. Enter a numerical value in the
DHCP Lease Time
field. This value represents the number of hours
you can use the assigned IP address before the DHCP lease expires.
8. Select a public IP address pool that is assigned via DHCP on the local area network.
Note:
Change to the Public IP address only when used in conjunction with DMZplus or
secondary subnet functionality that allows you to have public IP addresses routed through
the device.
9. Click Save
Allocating IP Addresses
You can allocate specific IP addresses to devices that are running in the DHCP mode, and map
devices to particular static (public) or private IP addresses. For Internet public hosting of application or
servers associated with static addresses, you can map a device to a specific public fixed IP address
or to the next unassigned address from the public pool. The default public IP device mapping is to the
Router WAN IP address.
Note:
Alternatively, you may also statically configure public or private IP addresses on the
device themselves. Statically addressed device addresses override settings made on this
page.