background image

Connect the Computer to the Gateway

10

Install the 2Wire Gateway USB Driver - Macintosh 

Note: 

The 2Wire gateway supports USB for Macintosh OS 8.6, 9.2, 10.1.4, 10.1.5, 10.2.0, 

10.2.1 to 10.2.6, 10.3.3 to 10.3.9, 10.4.0, and 10.4.1.

Before making the USB connection to the gateway, you must install the 2Wire gateway USB driver on the 
computer. The following instructions are for USB installation on Macintosh computers running OS 10.2.

1.

With the computer powered on and the 2Wire Setup Wizard CD in the CD-ROM drive, double-click the 
2Wire CD icon on the desktop.

2.

Double-click 2Wire USB to begin the driver installation.

3.

If the user has set up an administrator name and password, the Authenticate screen opens. Enter the 
administrator name and password and click 

OK

.

4.

Follow the on-screen instructions. When the driver installation is complete, you will be prompted to 
restart the computer.

5.

After the computer restarts, connect the provided blue USB cable from the 

USB-PC

 port on the 2Wire 

gateway to the computer's 

USB

 port.

Summary of Contents for 3600



















































































Reviews: