Gateway User Interface
16
•
Connection Status. There are two ways you can check the current status of your gateway’s broadband
connection: you can use the BROADBAND LINK indicator light on the front of your gateway, or, if your
computer is connected to the network, you can view the user interface. Connection Speed
•
Connection Speed shows the incoming and outgoing data rates of your DSL connection, measured in
kilobits per second (Kbps). Incoming is the speed of data flowing from the Internet to your network;
Outgoing is the speed of data flowing from your network to the Internet.
•
Connection Information. Connection Information shows the following basic system configuration
information:
−
Internet Address. The broadband IP address assigned by your service provider to your gateway so
that it can communicate on the service provider’s network. This address is assigned to you by your
broadband Service Provider for all communication on the broadband network.
−
Hardware Address. (Also known as the MAC address or physical address). When your gateway is
connected to the broadband network, an association is made between its unique hardware address
and its Internet address before it can communicate to the broadband network.
−
Key Code. The activation code that tells your gateway how to connect to your service provider. The
key code is used during the installation process to customize the settings for your broadband
provider.
Viewing Broadband Link Details
The Broadband Link Details page displays technical information about your broadband connection.
Technical support representatives use this information to help troubleshoot problems with your broadband
connection.
