13
Appendix A: Wireless Adapter Configuration
Now that you have installed the drivers for your wireless adapter, you must
configure it to work with the 2Wire gateway. A wireless network requires a network
name (SSID) and an encryption key to operate. Every 2Wire wireless gateway
comes with a unique network name and encryption key printed on the bottom of
the unit.
1.
With the 2Wire Wireless Installation CD in your CD-ROM drive, click
Run
from
the Windows Start button. In the
Open
field, enter D:\setup.exe and click
OK
.
If your CD-ROM drive is not located on D:, substitute the appropriate letter (for
example, E:\setup.exe).
2.
When the Driver and Utilities program page displays, click the
Configure 2Wire
Wireless Adapter
button.
