30
6.
To identify your network, click
Next
. The Edit
Configuration screen appears.
7.
In the Network Name field, enter the word
“
2WIRE
” followed by the last three digits of
your HomePortal serial number, located on the
bottom of your HomePortal. This is the
Wireless Network Name. The Wireless
Network Name is case-sensitive, so it is
important that you enter the word “
2WIRE
” in
capital letters.
8.
Click
Next
. In the Set Security field, check the
Enable Data Security
checkbox. Verify that the
Use Hexadecimal (0-9, a-f, A-F)
radio button is
selected.
9.
In the Key field, enter your ten-digit Wireless
Encryption Key, located on the bottom of your
HomePortal.
10.
Verify that
Key 1
is selected in the
Encrypt data
with
pull-down menu (this is the default).
11.
To select a power management option, click
Next
. The following screen appears.
12.
Select the power management option that you
wish to use (the default is
Off
), and click
Next
.
