Appendix A: Install the Gateway on Other Operating Systems
15
5.
Proceed to “Configuring the Internet Connection” on page 16.
USB Connection
.
Figure 8. Gateway Connected Via USB (Macintosh)
1.
Install DSL phone filters according to the instructions on page 2.
2.
Insert the 2Wire CD in the computer’s CD-ROM drive.
3.
Double-click the 2Wire CD icon on your desktop.
4.
Double-click
2Wire USB
to begin the driver installation.
5.
If you have set up an administrator name and password, the Authenticate screen opens. Enter your
administrator name and password and click
OK
.
6.
Follow the on-screen instructions. When the driver installation is complete, you will be prompted to
restart your computer.
7.
After your computer restarts, connect the provided blue USB cable from the
USB-PC
port on the 2Wire
gateway to your computer’s USB port.
Note:
Connecting your computer to the gateway using USB requires an available USB port.
Only one Windows or Macintosh computer can be directly connected to the 2Wire gateway
using the USB connection. The following instructions are for Macintosh computers running
OS 9.x.
PHONE LINE
TELEPHONE
PO
WER
RESET
USB - PC
Gateway 2701
Computer
DSL filter
USB cable
DRAFT ONLY
2Wire Confidential