![background image](http://html.mh-extra.com/html/2wire/i38hg/i38hg_user-manual_440132016.webp)
iNID User Guide
12
Connecting the Power Cable
1.
Connect one end of the power supply cable to the
POWER
port of your i38HG (
).
2.
Connect the other end of power supply cable to a 3-prong AC electrical outlet.
3.
Observe the
POWER
indicator; it flashes red once, followed by flashing green, then remains solid green.
Connecting Your Computer to the i38HG
There are two ways to connect your computer to the i38HG: via Ethernet or wireless. With either connection,
the first computer you connect to the network is used to configure the i38HG for proper operation.
Connecting via Ethernet Ports
You can directly connect up to four computers to the i38HG using the Ethernet connection. Connect one
end of the Ethernet cable (yellow) to any available ETHERNET port (yellow) on the i38HG and the other end
to the computer's Ethernet port (
You are now ready to start your system (refer to the
section).
Figure 6: Ethernet Connection
Note:
For safety reasons, do not modify electrical outlets that do not have a
3-prong plug with a 3-prong adapter.
Note:
Refer to the
section if the indicator does not stay
green.
Note:
Your i38HG is shipped with an 6-foot Ethernet cable. Use a CAT5 cable
if you need additional or longer Ethernet cable.
D
A
TA
PO
W
ER
R
E
SET
L
O
C
A
L
E
T
H
E
R
N
E
T
Computer
Ethernet Connection
i38HG
AC Power
Summary of Contents for i38HG
