![background image](http://html.mh-extra.com/html/2wire/i38hg/i38hg_user-manual_440132035.webp)
Configuring Wireless Network
31
5.
Select the device you want to allow from the
Blocked Devices
pane.
6.
Click
<<
; the list(s) you selected appears in the
Blocked Devices
pane, as shown below.
7.
Click
Save
.
Blocking Devices with MAC Address Filtering
The MAC address is a factory-programmed address assigned to each hardware device. By default, the
i38HG uses its built-in hardware address. When enabled, the wireless connection is blocked to the MAC
address listed in the
Allowed Devices
pane. Using the MAC address filtering feature enables you to block
wireless connection to all devices or an individual device.
Note:
Make sure that the
Enable
checkbox is selected; otherwise, the device
will not be allowed.
Note:
To select multiple addresses, hold down the [Shift] or [Ctrl] keys while
making your selections. Using the [Shift] key lets you make your selections in
a contiguous order while the [Ctrl] key selects the groups in a random order.
Summary of Contents for i38HG
