Configuring LAN Devices
71
3.
Click
Link Configuration
; the following page opens.
1.
Change the Upstream Maximum Transmission Unit (MTU), if necessary.
2.
Select
Enable
to add a secondary network to the broadband WAN interface.
3.
Enter information in the following fields:
−
Router Address
: Enter the router address (this is the router address from the secondary subnet
provided by the service provider).
−
Subnet Mask
: Enter the subnet mask (this is the router mask from the secondary subnet provided
by the service provider).
4.
Select the
Auto Firewall Open
checkbox if you want to automatically disable the firewall for all devices
using addresses from this subnet. (By default, the firewall protection is enabled.)
5.
Click
Save
.
Note:
You can individually enable the firewall on a per device basis (refer to
) or on a per application basis using the
Firewall option (refer to
Allowing all Applications (DMZplus)
).
Summary of Contents for i38HG
