iNID User Guide
74
4.
Click
DHCP
; the
DHCP Configuration
page opens.
Figure 15: DHCP Configuration
5.
Select
Configure manually
if you want to set up a range for the DHCP address IP pool.
6.
Enter information in the following fields:
−
Router Address
: This is the IP address of your i3802V used for all communication on your local
devices.
−
Subnet Mask
: This is the subnet mask used for all communication on your local devices (the default
is 255.255.255.0).
−
First DHCP Address
: The first IP address in the DHCP address pool that you will be distributing over
the private network.
−
Last DHCP Address
: The last IP address in the DHCP address pool that you will be distributing over
the private network.
7.
Enter a numerical value in the
DHCP Lease Time
field. This value represents the number of hours you
can use the assigned IP address before the DHCP lease expires.
8.
Select a public IP address pool that is assigned via DHCP on the local area network.
9.
Click
Save
.
Note:
Change to the Public IP address only when used in conjunction with
DMZplus or secondary subnet functionality that allows you to have public IP
addresses routed through the device.
Summary of Contents for i38HG
