Wireless PCI Driver Installation Instructions
Introduction
This document describes the procedure to install the driver for the 2Wire Wireless PCI Adapter
under Microsoft Windows, and to run a wireless configuration program to configure your 2Wire
Wireless PCI Adapter to work with the 2Wire HomePortal or OfficePortal wireless gateway.
Microsoft Windows 98SE, ME, 2000, and XP are supported.
The driver software supplied here is for new installation only. If you have
already set up your 2Wire Wireless PCI Adapter with driver software in the
supplied CD, you do not need to re-install this driver software.
STEP 1 - Driver Installation
Instruction for Windows XP
1. Make sure your 2Wire Wireless PCI Adapter is not connected to your computer.
Download the driver package file to your local hard disk.
2. Double-click the driver package file to extract all driver files. The driver installation files
will be placed in your hard disk in the C:\TWWGPCI_TEMP directory.
3. Insert your 2Wire Wireless PCI Adapter to an available USB port in your computer. The
Windows Found New Hardware Wizard will start. Select the option to install from a
specific location.
Click Next to continue.
2
2Wire, Inc.
October 2004
