At no time shall 360 Hunting Blinds be liable for any accidents due to normal or improper use of blinds or tower stands.
We recommend that you follow standard safety procedures when entering and exiting the blind, or climbing or decending the
ladder.
Always use a gear rope to raise and lower your equipment into the blind.
Always use the handrail with both hands when climbing the ladder.
Never use the door handle to pull yourself onto the platform or stabalize your entry and exit.
SAFETY DISCLAIMER
• 1 floor
• 1 floor carpet
• 3 wall panels
• 1 door panel
• 1 roof
• Caulk
• 1 touch up kit
• 1 set of keys
SHANTY HUNTER
ASSEMBLY MANUAL
Follow this guide to assemble a Shanty Hunter Blind from
start to finish.
If you purchased a tower stand with your blind, please
refer to that assembly guide to assemble the tower first, the
come back to finish the setup of the blind on the fully
assembled tower stand.
INTRODUCTION
SUPPLIES NEEDED
PARTS LIST
• T-50 construction stapler
• Utility knife
• Impact Driver
• Caulk gun
• Level
• Flat bar or prybar
• 4 - 8” – 12” Pressure Treated 4 X 4s
