360HUNTINGBLINDS.COM
PAGE 3
STEP 2
Align the carpet roll to the edges of
the blind fl oor and begin fastening
with the T50 Construction Stapler.
Work from one end of the fl oor to the
other, working out the wrinkles and
continually aligning the edges while
going along. If some carpet overhangs
past the edge of the fl oor, use a utility
knife to cut the carpet back so it is no
longer overhanging.
INSTALL THE CARPET
STEP 1
Install 8” – 12” 4x4s into the pockets on
the fl oor and secure with 3 – 3” deck
screws per foot. If you purchased a
tower stand you may skip this step.
INSTALL THE LEGS
