360HUNTINGBLINDS.COM
PAGE 4
STEP 4
Run a 3/8” bead of caulk along the
leading edge where the second panel
will meet the fi rst. Make sure to caulk
on the siding between the interior
framing and the outside of the blind.
Remember, the better the seal the lon-
ger the blind will last!
CAULK PANEL EDGE
STEP 3
Set the fi rst panel into place. Have one
person hold the top of the panel while
another person aligns the bottom.
Make sure the corners of the panel
match with the corner of the fl oor and
that the panel doesn’t gap away from
the fl oor. Use two screws to secure the
panel to the fl oor from the inside.
INSTALL THE FIRST PANEL
