360HUNTINGBLINDS.COM
PAGE 7
STEP 9
Fasten the roof to the top of the wall
panels. Center the roof on the blind,
aligning the roof with the wall panel
joints. Start above the door and screw
through the top of the wall panel into
the roof panel with SHORT screws,
aligning as you work toward the back
of the blind. Run plenty of screws to
ensure the roof can’t come off.
FASTEN THE ROOF
STEP 10
If there are wrinkles in the carpet, use
a fl at bar or prybar to lift the wall pan-
els and push wrinkles back out. Then
fasten the wall panels to the fl oor with
several screws.
FASTEN THE WALLS
