background image

C. Management and storage methods 

Disconnect the power cable from the outlet.

After use, check the equipment is clean.

Do not place anything on the heater.

There is a risk of burns because the heater area is heated after using this product.

Do not disassemble or repair this product.

After using this product, must remove the power cable from outlet

Contact with sheet softening may cause sheet deformation and burns.

Do not use for other purposes.

Caution 

06

Please keep out of reach of children.

Please use in a place separated from fire and water.

Temperature :

 -10 ~ 70

Humidity : 

10~100%

Pressure :

 50~106kpa

Maintenance & Storage

07

This product has passed strict testing and inspection.
This product is warranted for 12 months from the date of purchase from us.

①  

This product will be repaired free of charge the performance and function defect that occurred under normal use 
condition within the warranty period. If it cannot be repaired, we will replace it free for charge with a new product. 

Repair fee will be charged after the warranty period is expired.

In case of any of the following cases within the warranty period, repair fee will be charged.

  

 

Failure caused by intention or negligence of the consumer.

  

 

Failure caused by repair at a place not designated by us.

  

 

Failure caused by power supply or faulty connecting devise.

  

 

Other arbitrary disassembly, failure due to arbitrary alteration, etc.

Warrantee

08

Clean the product and each part with a soft cloth and air.

Cleaning

09

Please contact us if you have any mechanical problems.

  

Telephone : 

82-31-909-8774

  

Fax  

:

 82-31-909-8773

  

Homepage : 

www.3amedes.co.kr

Customer Support Division

10

Summary of Contents for EASY-PRESSO EP-100






Reviews: