![background image](http://html.mh-extra.com/html/3b-scientific-physics/3b-netlog-1000009/3b-netlog-1000009_instruction-manual_440422009.webp)
9
10.4 Reading and saving measurement data
Reading and saving measured data with the
3B NET
log™
equipment:
•
Connect the 3B NET
log
™ equipment to a
computer via USB cable.
•
Start 3BNET
data
and click on the tab “Read
Data”.
•
Press
Read
and wait till the progress bar
reaches 100%.
•
Select the measurements you wish to be
saved from the list on the left.
•
Select columns that are to be written next
to the data.
•
Click
Save selected data to files.
•
Enter a file name for each measurement,
or accept the default name.
•
For further processing of the saved data,
use spreadsheet or data analysis pro-
grams.
11. Update Firmware
•
In the 3B NET
data
software, click “Update
firmware” tab.
•
Follow the instructions in the left-hand sec-
tion of the software window and click
“
Start
” in the options box.
The current version of the firmware will now be
installed automatically. As an alternative, use
“Browse” in the options’ box to search and
install older firmware versions.
12. Format of exported files
Exported files have the following format (the words shown here between the delimiters <> are simply
placeholders for actual data. Entries are separated by tab characters. Depending on the settings,
some columns may be omitted):
# <Date> <Time>, <Inputs/Measurement modes>, <Sampling rate>, <Number of measurement re-
cords>
Index (tab) Absolute date/time (tab) Relative time (tab) <Quantity at analogue input A>[<Unit for ana-
logue input A>] (tab) <Quantity at analogue input B>[<Unit for analogue input B>] (tab) Dig A (tab) Dig
B (tab) Dig C (tab) Dig D(return)
1(tab)<Absolute date/time of the first measurement record>(tab)<Relative time of the first measure-
ment record>(tab)<Value 1 of analogue input A>(tab)<Value 1 of analogue input B>(tab)<Value 1 of
digital input C>(tab)<Value 1 of digital input D>(return)
2(tab)<Absolute(s) Date/Time of the second measurement data set >(tab)<Relative time of the second
measurement data set>(tab)<Value 2 of analogue input A>(tab)<Value 2 of analogue input
B>(tab)<Value 2 of digital input C>(tab)<Value 2 of digital input D>(return)
etc.
Summary of Contents for 3B Netlog 1000009
Page 12: ......