background image

maximum flexibility and redundancy. In this way, you may remove any 

of the two power supplies without turning off the system.   

Redundancy

 

 

During operation, both power supplies are switched on and share the 

current  load.  In  case  that  one  of  them  should  fail,  the  other  will 

instantaneously  take  100%  of  the  load  without  any  loss.  Similarly,  if 

one  power  supply  is  removed  from  servicing,  it  can  be  switched  off 

and removed while the chassis continues functioning.   

Protection System 

The power of each converter bay comes from the two shared power 

supplies.  Each  bay  is  isolated  from  each  other  under  a  certain 

protection mechanism, so that it is free from any problem that might 

occur  to  the  power  supplies  or  faulty  converter  bay.  This  is  the  best 

solution to protect your investment in media converters.   

 

CONNECTING TO POWER 

 

The chassis system is equipped with two power supplies.   

Step 1: Connect the supplied AC power cord to the receptacle on the front 

panel of each power supply.   

Step 2: Attach the plug into a standard AC outlet with a voltage range from 

100~240Vac.   

Step 3: Turn on the chassis system by flipping the ON/OFF switch beside 

the  receptacle  to  ON  position.  The  LEDs  on  the  front  panel  of  the 

media converter chassis system will come on then. 

Cooling system: 

The chassis system can hold two power supplies and up to14 media 

converters, and therefore, it is necessary to provide a good cooling 

system and so to achieve obtain adequate ventilation. The chassis is 

equipped with two hot-swappable power supplies with fans at the rear. 

The chassis is also equipped with one fan on the left and right side of the 

chassis. 

Type Application: 

 

 

Specifications 

CHASSIS  SYSTEM  Capacity 

Sixteen  bays  for  housing  up  to  16  media 

converters   

Power 

Two power supplies provided, hot-swappable   

Cooling 

Two power supplies with fans One fan on the left and the other 

one on the right side of the chassis 

Dimensions 

W440 mm 

×

 D276 mm 

×

 H90 mm Standard 19

 size, 2 U 

Power Supply Power Input 

110~240Vac, 50~60Hz or -48Vdc 

Operating Temperature 

0

°

C to 40

°

 C (32

°

F to 104

°

F) 

Storage Temperature 

-25

°

C to 70

°

C (-13

°

F to 158

°

F)   

 

 

Summary of Contents for 3C-MC-R16







Reviews: