2-8
C
HAPTER
2: I
NSTALLING
THE
3C619C A
DAPTER
Connecting to Shielded Twisted-pair (STP) Cable
1
Locate the adapter’s DB-9 connector on the backplate, as
shown in Figure 2-5.
Figure 2-5
Attaching the STP Cable with the DB-9 Connector
2
Locate the DB-9 connector on the shielded twisted-pair
cable.
3
Connect the cable’s DB-9 connector to the adapter’s DB-9
port, and secure it by tightening the two screws.
4
Connect the other end of the cable to a network dual
access unit (DAU), a multistation access unit (MAU), or a
controlled access unit (CAU).
If you have a NetWare server, proceed to Chapter 3. If you
have any other type of network operating system, proceed to
Chapter 4.
4 16
DB-9 port
DB-9
connector
