3-2
C
HAPTER
3: U
SING
THE
A
UTO
L
INK
F
EATURE
FOR
N
ET
W
ARE
■
Logs in to the server and updates the NetWare client
software if a 3Install account exists on the server; otherwise,
the client software is installed from the
TokenDisk
diskette.
■
Modifies the CONFIG.SYS, AUTOEXEC.BAT, and NET.CFG files.
(The previous versions of these files are renamed
CONFIG.3CM, AUTOEXEC.3CM, and NET.3CM.)
If you want to configure the adapter manually, see Chapter 4,
“Standard Installation and Configuration.”
AutoLink Requirements
Verify that you meet the following requirements.
■
The 3C619C adapter must be installed in your PC and
connected to the network.
■
NetWare on the server must be version 2.2 or later.
■
After running the AutoLink program, you need an account
on the target NetWare server with an assigned user ID and
password to log in to the server.
AutoLink Options
■
A 3Install account on the server allows the AutoLink program
to download the NetWare client software from the server
instead of from the
TokenDisk
diskette. This feature can be
used to install newer versions of the software or to customize
your installation.
Installation instructions for creating the 3Install account and
preparing the server can be found in the
A:\QINSTALL\SERVER\README.TXT file on the
TokenDisk
diskette.
■
The AUTOLINK.CFG file can be used to modify the AutoLink
process. The AUTOLINK.CFG file in the
TokenDisk
diskette’s
root directory contains default settings and descriptions of
the AUTOLINK.CFG parameters.
