5-6
C
HAPTER
5: I
NSTALLING
N
ETWORK
D
RIVERS
Installing the NDIS 2.01 Driver
The Network Driver Interface Specification (NDIS) was developed
by Microsoft and 3Com. This software specification is used in
network operating systems such as IBM LAN Server or Microsoft
LAN Manager to create drivers for network adapters.
The NDIS Driver Installation and Information option on the
Network Drivers menu shown in Figure 5-3 provides instructions
for installing the NDIS driver.
The following steps assume you have already configured the
adapter, started the program on the
TokenDisk
diskette, and
are at the main menu.
To obtain driver installation instructions for your network
operating system, follow these steps:
1
Select Network Drivers on the main menu and press
[Enter].
2
Select NDIS Driver Installation and Information on the
Network Drivers menu, and press [Enter].
3
Select your network operating system.
4
Follow the instructions provided.
Instructions for using the
TokenDisk
diskette as an automatic
OEM import disk for IBM LAN Server 3.0, Microsoft LAN
Manager, and Microsoft Windows for Workgroups are included.
If you choose not to use these NOS import procedures, you
can manually install the NDIS 2.01 drivers by updating the
PROTOCOL.INI and CONFIG.SYS PC startup files. Proceed to
the next section for instructions.
