14
C
HAPTER
1: F
EATURE
C
ODES
Caller ID Restriction
(CLIR — Next Call)
Restrict the NBX system from
sending out your Caller ID
information for only this call.
Press
*
+ 890
+
*
+ Dial outside party’s
number
+ Send
To use this feature you must have CLIR Features
enabled for your Class of Service (CoS) group. To check
if you have CLIR Features enabled, log in to the NBX
NetSet utility and go to
My Calling Privileges > Call
Permissions
.
Do Not Disturb — On/Off
Send all incoming calls directly to
the call coverage point that you
specified in
the NBX NetSet utility
Call Forward > Call Forward
or
Override.
Press
*
+ 446
+ Send
Persists until you turn
off the feature by
repeating the
sequence.
To view the current setting, log in to the NBX NetSet
utility and go to
My Calling Privileges > Feature
Settings.
Forward All Calls to Voice
Mail — On/Off
Send all incoming calls to your
voice mailbox (or to wherever you
have specified as your call
coverage point) after one ring on
your telephone.
Press
*
+ 440
+ Send
Persists until you turn
off the feature by
repeating the
sequence.
To view the current setting, log in to the NBX NetSet
utility and go to
My Calling Privileges > Feature
Settings
.
Password — Set Initially
Use this code sequence to set
your NBX NetSet utility password
for the first time.
Press
*
+ 434
+
*
+ new password
+
*
+ repeat your new
password
+
Send
You can use this procedure only if you or your
administrator have not previously changed or reset this
password from its default value of 1234. If your
password has already been changed or reset, you must
use the
Password — Change
procedure
to change
the password.
When typing your password:
■
Use only 4- to 10-digit numbers
■
Do not use letters,
*
, or
#
as part of your password.
After you set your NBX NetSet password, you
must
set
the SIP authentication password in your SIP telephone
to match the new NBX NetSet password.
Table 3
NBX Feature Codes (continued)
Features
Using Codes
Notes
