1
F
EATURE
C
ODES
This guide describes the NBX features that are accessible on 3Com 3108
Wireless Telephones and third-party IP telephones that are connected to
the NBX system running in SIP mode. This guide focuses primarily on the
NBX feature code sequences and covers these topics:
■
Overview
■
General Instructions
■
Using the NBX NetSet Utility
■
How to Enter a Feature Code
Overview
SIP, the Session Initiation Protocol, is a signaling protocol for Internet
conferencing, telephony, and instant messaging. NBX 6.0 allows for SIP
integration of generic IP phones with 3Com legacy devices when the NBX
is running in SIP mode. For more information on the NBX system running
in SIP mode, see your NBX administrator.
General
Instructions
To access most of the NBX features on a 3108 Wireless or generic IP
telephone, press
*
and enter a 3-digit code. Arguments should have a
*
before and after only if more arguments or extensions are to be added.
For example, you would enter the sequence
*
465
*
1000 and press Send
to forward all calls to extension 1000.
For complete descriptions of the NBX telephone features described in
Table 3
, log in to the NBX NetSet utility (see
“Using the NBX NetSet
Utility”
) and click the Help button for information about the specific
topics. Then use this guide to access the features that are available using
your IP telephone.
