5-6
C
H
A
P
T
E
R
5:
A
D
D
I
T
I
O
N
A
L
M
A
N
A
G
E
M
E
N
T
U
S
I
N
G
VT100
Getting Started
This section explains logging on to the VT100
management facility, displaying the main menu and
logging off.
Main Banner
If you are using a VT100 terminal connected (directly
or through modems) to the console port, you need
to perform the wake-up procedure. To do this, press
[Return][Return] at the terminal.
By default, the hub automatically configures the
baud rate of its console port to operate with the
connected terminal or modem, provided the parity,
stop bits and character size are identical
to the
connected terminal or modem
.
If you are using Telnet or SLIP, the wake-up
procedure is performed automatically.
When the wake-up procedure is successfully
completed, the main banner is displayed, as shown
in
Figure 5-2
.
Press [Return] to display the Logon screen.
Figure 5-2
Main Banner Screen
16710.bk : MANVT100.FRM Page 6 Tuesday, October 7, 1997 11:38 AM
