5-18
C
H
A
P
T
E
R
5:
A
D
D
I
T
I
O
N
A
L
M
A
N
A
G
E
M
E
N
T
U
S
I
N
G
VT100
Editing Users
The Edit User screen, as shown in
Figure 5-10
, is
used to change your own password or community
string. This option is available only for users with
security
access level.
No user can directly change another user’s password
or community string. If you are a system
administrator and wish to change another user’s
password, you need to log on as the other user.
Figure 5-10
Edit User Screen
The options are similar to the Create User screen, see
“Creating Users” on page 5-17
. The main differences
are the password fields. You must type in your
current password in the
Old Password
field before
you can change any fields. To set a new password,
enter the password in both the
New Password
and
Confirm Password
fields.
If you enter different values for the
New Password
and
Confirm Password
fields, an error message is displayed
when the
OK
button is selected. If [Return] is then
pressed, a null password is set for the user. The user
can log in but if an attempt is made to change the
password again, the message ‘Old Password Field
Not Completed’ is displayed.
If you forget your password, refer to the advice in
“Problems When Using Quick Config Manager” on
page 6-3
.
16710.bk : MANVT100.FRM Page 18 Tuesday, October 7, 1997 11:38 AM
