LAN Adapter Support, Universal Serial Bus (USB) Ethernet Support Device Driver.
©2003, Jonas Buys.
JBHWIS00001.
www.os2warp.be
similar thing as shown in FIGURE2. In the
Parameters for USB ETHeRnet
Adapter
dialog box, click in the
USB Vendor ID
field, and change the value
so that it matches your adapter’s one. Then do the same for
Product ID
field. When finished, confirm the changes by clicking the
OK
button. Note
that you needn’t include the “0x” in front when entering the IDs.
Figure 1: The Adapter and Protocol Configuration dialog box.
7.
Add the required protocols from the
Protocols
list to the USB Ethernet
adapter. You can do this by selecting the appropriate network interface
card (NIC) in the
Current Configuration
field, selecting a protocol in the
Protocols field, and clicking
Add
. The associated protocol should appear
indented underneath the NIC to which it was assigned. You can change the
protocol setting by selecting the assigned protocol in the
Current
Configuration
field, and clicking the
Edit
button.
8.
Press
OK
button to close
Adapter and Protocol Configuration
dialog
box.
