Setup Program
13
To setup the gateway for use with a PPP over Ethernet connection, use the
following procedure:
1
Enter your PPP over Ethernet user name in the
PPPoE User Name
text box.
2
Enter your PPP over Ethernet password in the
PPPoE Password
text box.
If you don’t want to change the password, leave this text box empty.
3
Enter your PPP over Ethernet service name in the
PPoE Service Name
text box.
This is optional. Not all ISPs require a PPPoE service name.
4
Enter a value in the
Maximum Idle Time
text box.
This value will correspond to the amount of idle time (no Internet activity), in
seconds, that will pass before the gateway automatically ends your PPP over
Ethernet session. Leave the text box blank to disable this function.
5
Check all of your settings, and then click
Reboot
.
The gateway will restart, and your settings will be activated.
Dial-up Network
Activating the
Dial-up Network
radio button and then clicking
SAVE & NEXT
in the
Choose Internet Connection Configuration screen will generate the Primary Setup
screen for dial-up networking setup.
To setup the gateway for use with a dial-up connection, use the following
procedure:
1
Enter your dial-up telephone number in the
Dial-up Telephone Number
text box.
2
Enter your dial-up user name in the
Dial-up User Name
text box.
3
Enter your dial-up password in the Dial-up Password text box.
4
Enter your primary DNS address in the Primary DNS Address text box.
5
Enter your secondary DNS address in the Secondary DNS Address text box.
This is optional. Not all ISPs require a secondary DNS address.
6
Enter a value in the
Maximum Idle Time
text box.
This value will correspond to the amount of idle time (no Internet activity), in
seconds, that will pass before the gateway automatically ends your dial-up
session. Leaving the text box blank disables this function.
