Using the Menus
61
Use the options on the Main menu as follows:
n
Select
[1] System Administration
to access common parameters.
n
Select
[2] Configuration Management
to view or set configuration parameters.
n
Select
[3] Fault Management
to view or acknowledge alarms and set
loopbacks.
n
Select
[4] Performance Management
to view statistical data.
n
Select
[5] Exit
to log out.
Using the Menus
The title of the menu or display appears at the top of the screen. Your access
status appears in the upper righthand corner.
n
Read-Write
means that you have Read-Write control of the PathBuilder S600
and can make changes to the system.
n
Read Only
means that you can only monitor the menus and displays.
Navigating through the
Menus
You select a menu option by typing the selection number and pressing [Enter].
Displays that contain information and no selections include the prompt:
Press Esc for previous menu
Multi-page displays also prompt you to press “N” for the next page or “P” for the
previous page.
Only the Main menu contains the Exit selection to log out. Selecting Exit returns
you to the title screen with the password prompt. All other menus have a Previous
Menu selection which returns you to the Main menu one screen at a time. You can
also press [Esc] to move back one menu at a time.
The auto logout feature automatically logs you out and returns you to the title
screen if you do not press a key for a specified time (1 - 99 minutes). To set the
autolog timeout, select
[1] System Administration
from the Main menu, then
select
[1] General System Information
, then select
[6] Set Auto Logout Time
.
Understanding the
Menu Hierarchy
The PathBuilder S600 menu hierarchy includes several layers of menus. Each
submenu has a name that is the same or similar to the name of the option that
displays it. For example, selecting
[2] Configuration Management
on the Main
Menu displays a submenu titled Configuration Management, and selecting
[4]
Manage System Clock
from the System Administration menu displays a submenu
titled System Clock Configuration.
You can then select options on the submenus to display additional submenus or
prompts that allow you to set various parameters. The options that appear on
some submenus vary, depending on what modules you have installed. For
example, the System Clock Configuration menu includes a
Set CBR
option only if
you have installed a CBR module, a
Set DS3
option only if you have installed a DS3
UNI module, a
Set IMA
option only if you have installed a DS1 UNI or E1 UNI
module, and so on.
Summary of Contents for 3C63100-AC-C - PathBuilder S600...
