52
C
HAPTER
4: I
NSTALLING
THE
N
ET
W
ARE
C
LIENT
AND
S
ERVER
D
RIVERS
NetWare 3.12
To install the driver in a NetWare 3.12 server:
1 Copy the MSM31X.NLM, ETHERTSM.NLM, and
NBI31.NLM files from the EtherCD to the directory on
your hard drive where other NLM files are located.
2 Copy the LAN driver file (3C90X.LAN) from the
EtherCD to the same directory.
3 Add the following two lines to the AUTOEXEC.NCF file:
load C:\NWSERVER\3C90X.LAN slot=<slot>
NAME=<name> FRAME=<frametype>
bind ipx to <name> net=<number>
4 Save and exit the file, and then reboot the server.
NetWare 4.x
There are two ways to install the NetWare 4.x driver:
■
Import the driver when installing the NetWare
server software.
■
Copy the driver to the server's hard disk, and then load
the driver manually.
Importing the Server Driver
To import the server driver into a NetWare 4.x server:
1 Install the NetWare server software.
2 Insert the EtherCD in the CD-ROM when the NIC
selection menu appears.
3 Press [Insert].
This key tells the server installation program that you want
to add a driver externally.
4 Press [F3].
This key tells the server installation program that you want
to change the path.
Make sure that you have the latest NetWare Support Pack
installed. that changes the LOADER.EXE file and provides
the NBI.NLM, MSM.NLM, and ETHERTSM.NLM files.
3Com has provided the latest *.NLM files (at time of
testing) on the
EtherCD
in the \NWSERVER directory.
book Page 52 Thursday, July 29, 1999 12:23 PM
