3Com 3C905C-TX-M, Quick Manual

Verifying Successful Installation

11

10 Remove 

EtherDisk

 diskette 2 from drive A, and then 

click 

Yes

 to restart the PC.

You must restart the PC to complete the installation.

The installation is complete. Go to the next section, 
“Verifying Successful Installation,” to confirm that the 
NIC is properly installed.

After Windows restarts, double-click the Network icon 
in the Windows Control Panel and make sure that the 
configuration settings are properly configured for your 
network environment. Contact your system administrator 
for assistance.

Verifying Successful Installation

To verify that the NIC and its software are properly installed 
on a PC running Windows 95 or Windows 98:

1 Open the Windows 

Start

 menu, select 

Settings

, and 

then select 

Control Panel

.

2 Double-click the System icon.

3 Select the Device Manager tab.

4 Double-click 

Network adapters

 and make sure that 

the name of the NIC appears.

If a red X or a yellow exclamation point (!) appears next to 
the name of the NIC, the installation was not successful. 
See “Troubleshooting the Installation” and “Frequently 
Asked Questions” in Chapter 5 of the user guide for 
troubleshooting help.

Book  Page 11  Friday, March 19, 1999  11:21 AM