background image

F: GDI PRINTERS (Windows Printers)

GDI Printers, often called Windows Printers, require bi-directional com-
munication for printing, which is usually accomplished with a physical
cable. For these printers, Wireless Bluetooth printing is still possible but
requires additional steps. 

NOTE: When used with Bluetooth, GDI printers are not capable of using the Bluetooth
Printer Adapter s test button. There are also some other print monitor functions that do
not work, however, printing functions normally.

OPTION 1

The best solution is to download the  Windows Uniform printer driver
from your printer manufacturer s Web site. Search the driver catalog as
the  Windows Uniform printer driver  is usually offered as an alternative
to the driver delivered on the CD-ROM.

OPTION 2

1. Insert the Installation CD you received from your manufacturer.

Follow the instructions supplied by your printer manufacturer and
begin to install your printer.

2.  When prompted to  Use the Following Port:  select 

FILE: (Print to

File)

.

3.  Finish the installation process.

4. In the Printers and Faxes dialog, right-click on the printer icon. Select

Properties from the menu. 

5.  Select 

Ports

from the Printer Properties tabs. Select the port assigned

to your Bluetooth device.

NOTE: To see which COM port your Bluetooth device uses, open the Bluetooth
Connection Manager. Select the Tools menu and then the COM Ports option. The
Bluetooth COM ports dialog shows which COM port is associated with your 
Bluetooth device. For printing use the Serial Client COM port.

6. Change the port to the COM port identified in Step 5. Make sure the

Enable Bidirectional Support  is disabled (check box is unchecked).

Click 

OK

.

7.  Select Printer Properties and select 

Print Test Page

The first time the printer will respond with  not able to communicate
with the printer . Select 

Cancel

do not select 

Retry

. Some drivers have

an error reading the  Enable Bidirectional Support  setting even
though it is disabled. The second printing will fix this error.

8.  The 3Com Connection Manager dialog appears. Select the printer. 

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Summary of Contents for 3CRBB0196 - Wireless Bluetooth Printing

Page 1: ... already installed your printer follow the instructions supplied by your printer manufacturer and install your printer now B B I IN NS ST TA AL LL L T TH HE E B BL LU UE ET TO OO OT TH H S SO OF FT TW WA AR RE E 1 Insert the Bluetooth Printer Adapter CD into your CD ROM 2 The 3Com Wireless automatically appears Follow the steps on your screen to install the Bluetooth USB Device NOTE If you are usi...

Page 2: ... for Bluetooth printing If your printer does not print a test page see F GDI Printers below D PRINTER TEST PAGE To test the Bluetooth Printer Adapter by printer a test page press the Bluetooth Printer Adapter Test button to print the test page The test page contains information about the software version S80 500 xxx and the Bluetooth Device Address 00 03 6E XX XX XX If your printer does not print ...

Page 3: ...e the Following Port select FILE Print to File 3 Finish the installation process 4 In the Printers and Faxes dialog right click on the printer icon Select Properties from the menu 5 Select Ports from the Printer Properties tabs Select the port assigned to your Bluetooth device NOTE To see which COM port your Bluetooth device uses open the Bluetooth Connection Manager Select the Tools menu and then...

Page 4: ... showing data receiving and connection status Supported hardware An updated list of supported Bluetooth devices and printers is available at www mpitech com bpa Supported hardware includes but is not limited to Bluetooth PC cards from 3Com Motorola Digianswer IBM and Toshiba Bluetooth enabled PDAs Bluetooth enabled mobile phones Ericsson R520m Upgradeable Flash memory for upgrading E En nv vi ir r...

Reviews: