Defining Port-Based Authentication (802.1X)
63
■
Force-Authorized
— Indicates that any client has full access to the
port, even if it does not have 802.1X credentials or support 802.1X
authorization.
■
Force-Unauthorized
— Indicates that no client has access to the
port, even if it has 802.1X credentials and supports 802.1X
authorization.
■
Authenticator Operation Mode
— Allows single or multiple hosts
(clients) to connect to an 802.1X-authorized port.
■
Multi-Host
— Allows multiple hosts to connect to this port.
■
Single-Host
— Allows only a single host to connect to this port.
This is the default.
■
Authenticator Maximum Request
— Sets the maximum number of
times the switch port will retransmit an EAP request packet to the
client before it times out the authentication session. The field default
is
2
.
■
Authenticator Max Count
— The maximum number of hosts that
can connect to a port when the Multi-Host operation mode is
selected. The field default is
5
.
■
Authenticator Quiet Period
— Sets the time that a switch port
waits after the Authenticator Max Count has been exceeded before
attempting to acquire a new client. The field default is
60
seconds.
■
Authenticator Transmit Period
— Sets the time period during an
authentication session that the switch waits before re-transmitting an
EAP packet. The field default is
30
seconds.
Summary of Contents for 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE...
