3
After copying the files to your system, click
Finish
to complete the setup.
Install Procedure for Microsoft Windows NT4.0
1
Install the Wireless LAN PCI Adapter Hardware first. Click Install Hardware on the main
3Com 11Mbps Wireless LAN installation screen. The instructions are also listed below for
Installing the Wireless LAN PCI Adapter hardware.
2
Go to the Network Control panel-> select “Adapter” tab, and then add “Adapter”.
3
Respond to the prompts as they appear Click “Have Disk”.
4
If you are prompted for the drivers, enter
d:\drivers\NT,
where d: is the location of the CD-
ROM
5
The device will show up on the device list
6
Select the “3Com 3CRDW696 Wireless LAN PCI Adapter” and proceed with the installation
instructions.
7
The system will prompt for the IP address setting.
8
Restart the system
9
Insert the
Installation CD
in the CD-ROM and then click
Install Softwar
e.
10
Follow the setup wizard step by step to complete the Utility installation.
Installing the Wireless LAN PCI Adapter Hardware (All Operating
Systems)
Follow these steps to install the 3Com 11Mbps Wireless LAN PCI Adapter to your system after
installing software and drivers as described above.
(Windows will recognize the WLAN adapter and auto detect the driver):
1
Turn off power to your computer and unplug the power cord.
2
Remove the cover of your computer.
3
Locate an empty PCI slot and remove its slot cover. Save the screw.
