Defining Wireless Rogue Handling
165
To configure Rogue Handling:
1
Click
Wireless > Rogue Handling > Setup
. The
Rogue Handling Setup
Page
opens:
Figure 82
Rogue Handling Setup Page
The
Rogue Handling Setup Page
contains the following fields:
■
Access Point
— Contains a list of either the user-defined access
points or the MAC address assigned to wireless networks.
■
Scanning Interval
— Indicates the scanning Intervals. The possible
field values are:
■
Long —
Scans for rouges at 240 second intervals.
■
Short —
Scans for rouges at 20 second intervals.
■
Medium —
Scans for rouges at 150 second intervals.
■
Detect on Radio 802.11b/
g — Enables Rogue Detection on the
Radio 802.11b/g range.
■
Detect on Radio 802.11a
— Enables Rogue Detection on Radio
802.11a range.
2
Select the Access Point to be configured.
3
Enable Radio 802.11b/g or Radio 802.11a Rogue Handling detection.
Summary of Contents for 3CRUS2475 24
