Configuring Radio 802.11a Settings
175
To view Radio 802.11a Settings:
1
Click
Wireless > Radio 802.11a > Summary
. The
Radio 802.11a
Summary Page
opens:
Figure 88
Radio 802.11a Summary Page
The
Radio 802.11a Summary Page
contains the following fields:
■
Access Point Name
— Displays the specific access point to which the
radio settings are assigned.
■
DFS Status
— Indicates the current
Dynamic Frequency Selection
(DFS) status. DFS permits the system to scan and switch to different
channels. DFS listens for signals and monitors operating spectrums. IF
DFS detects a signal, the channel associated with the signal is vacated
or tagged as unavailable. The possible field values is:
■
Scanning
– Indicates the system is currently scanning channels.
■
VAP
— Displays the Virtual Access Point number.
■
SSID Broadcast
— Indicates that SSID Broadcasting is enabled.
■
BS SID
— Defines the Basic Service set by the SSID.
■
Profile
— Displays the Profile Name.
Select the access point to be displayed from the drop-down list.
Summary of Contents for 3CRUS2475 24
