54
C
HAPTER
3: M
ANAGING
D
EVICE
S
ECURITY
Configuring Port Authentication Settings
To configure 802.1x Global Settings:
1
Click
Policy > Security > 802.1x Global Settings > Setup
. The
802.1x
Global Settings Setup Page
opens:
Figure 29
802.1x Global Settings Setup Page
The
802.1x Global Settings Setup Page
contains the following fields:
■
Port-based Authentication State
— Indicates if Port Authentication
is enabled on the device. The possible field values are:
■
Enable
— Enables port-based authentication on the device.
■
Disable
— Disables port-based authentication on the device.
■
Authentication Method
— Specifies the authentication method
used for port authentication. The possible field values are:
■
RADIUS
— Provides port authentication using the RADIUS server.
■
RADIUS, None
— Provides port authentication, first using the
RADIUS server. If the port is not authenticated, then no
authentication method is used, and the session is permitted.
■
None
— Indicates that no authentication method is used to
authenticate the port.
■
Enable Guest VLAN
— Provides limited network access to authorized
ports. If a port is denied network access via port-based authorization,
Summary of Contents for 3CRUS2475 24
