12
Note:
When you select the WEP encryption mode:
z
If WEP40 is selected, 5 alphanumeric characters or a 10-digit
hexadecimal number should be entered as the password;
z
If WEP104 is selected, 13 alphanumeric characters or a 26-digit
hexadecimal number should be entered as the password;
z
If WEP128 is selected, 16 alphanumeric characters or a 32-digit
hexadecimal number should be entered as the password.
When you select the WPA or WPA2 encryption mode, enter a
password of 8 to 64 alphanumeric characters.
Step5
After the USB Adapter is connected to the wireless network, the
window as shown in Figure 18 appears. Select
Save this network
to save
the current wireless connection and the USB Adapter will automatically
connect to this wireless network at the next startup.
Figure 18
Connect to a network (II)
Step6
Click
Close
on the page to complete your configuration.
