36
C
HAPTER
4: R
UNNING
THE
S
ETUP
W
IZARD
Static IP Mode
To setup the Gateway for use with a static IP address connection, use the
following procedure:
1
Select
ISP has provided a static IP address,
(see
Figure 16
) and then click
Next.
Figure 20
displays.
Figure 20
Static IP Mode Screen
2
Enter your IP Address in the
IP Address
text box.
3
Enter your subnet mask in the
Subnet Mask
text box.
4
Enter your ISP gateway address in the
Internet (ISP) Gateway Address
text
box.
5
Enter your primary DNS address in the
Primary DNS Address
text box.
6
Enter your secondary DNS address in the
Secondary DNS Address
text
box.
This step is optional. Not all ISPs require a secondary DNS address.
7
Check all of your settings, and then click
Next
.
Summary of Contents for 3CRWE51196 - OfficeConnect Wireless Cable/DSL Gateway
