Industry Canada Notice (Applicable to Use Within Canada)
This device complies with Canadian RSS-210.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to
provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess
of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s web site
www.hc-sc.gc.ca/rpb.
Avis de Conformité à la Réglementation d’Industrie Canada
Pour empêcher toute interférence aux services faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur seulement et
devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal.
L’installateur du présent matériel radio doit s’assurer que l’antenne est située ou pointée de manière à ce que cette dernière
n’émette pas de champs radioélectriques supérieurs aux limites specifées par Santé Canada pour le grand public; consulter le Code
de sécurité 6, disponible sur le site Web de Santé Canada, à l’adresse suivante: www.hc-sc.gc.ca/rpb.
Industry Canada (IC) Emissions Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
Avis de Conformité à la Réglementation d’Industrie Canada
Cet appareil numérique de la classe B est conform à la norme NMB-003 du Canada.
European Community—CE Notice (WL-462, 802.11a Radio Module)
Marking by the symbol:
indicates compliance with the essential requirements of Directive 73/23/EC and the essential requirements of articles 3.1(b), 3.2
and 3.3 of Directive 1999/5/EC. Such marking is indicative that this equipment meets or exceeds the following
technical standards:
n
EN 301 893—Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering
essential requirements of article 3.2 of the R&TTE Directive.
n
EN 301 489-17—Electromagnetic compatibility and Radio Spectrum Matters (ERM); Electromagnetic Compatibility (EMC)
standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz
high performance RLAN equipment.
n
EN 60950—Safety of information technology equipment, including electrical business equipment.
Marking by the symbol:
indicates that usage restrictions apply.
n
This product is for indoor use only when using channels 36, 40, 44, 48, 52, 56, 60, or 64 (5150–5350 MHz).
n
Turbo mode is not allowed in EC countries.
n
Auto Channel Select option must remain enabled to ensure product compliance with EC regulations.
n
To ensure compliance with local regulations, be sure to select the country in which the access point in installed.
n
This product cannot be used in Greece.
n
This product can be used as shown in the table below:
Countries:
Allowable Frequencies of Operation:
Austria, Liechtenstein, and Switzerland.
5150–5250 MHz only
(Channels 36, 40, 44, and 48).
France and Ireland.
5150–5350 MHz only
(Channels 36, 40, 44, 48, 52, 56, 60, and 64).
Belgium, Denmark, Finland, Germany, Iceland, Italy,
Luxembourg, The Netherlands, Norway, Portugal, Spain,
Sweden, The United Kingdom.
5150–5350 MHz and 5470–5725 MHz
(Channels 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112,
116, 120, 124, 128, 132, 136, and 140).
![Pentagram Cerberus [P 6367] Installation And Operation Manual preview](http://thumbs.mh-extra.com/thumbs/pentagram/cerberus-p-6367/cerberus-p-6367_installation-and-operation-manual_1524254-01.webp)
