1-3
Product Features
P
ERFORMANCE
AND
R
ELIABILITY
3Com wireless access point performance features ensure reliable and seamless
connections for users wherever they roam:
Automatic channel selection automatically finds the least loaded channel for
interference-free communication.
Auto network connect and dynamic rate shifting keep users connected
through a wide variety of conditions by changing to the optimum connection
speed as they move through the network.
Virtual Access Point (VAP) support provides flexibility by allowing a single
access point radio to operate as up to four separate access points.
Wireless Distribution System (WDS) Bridging support allows you to create
large wireless networks in areas where pulling wires is restricted or
cost-prohibitive by linking several wireless access points together with WDS
links.
Virtual Access Point (VAP) Support
Virtual Access Point (VAP) support allows an access point radio to operate as four
separate access points, providing multiple wireless services to clients in a network.
Each VAP can be configured to provide access to different network resources and
can support different levels of security.
For example, in a university network, an access point (AP) could be used to offer
two services: The first service provides access to protected data for authenticated
university staff members, while the second service provides open access to the
Internet for unauthenticated users, such as students or visitors.
Up to four VAPs per radio are available, and each VAP can be configured with its
own security settings.
For information on setting up and configuring VAPs, see “Wired Equivalent
Privacy (WEP)” on page 4-52.
WDS Bridging and Spanning Tree Protocol (STP) Support
A Distribution System (DS) is a network (typically a wired network) that
interconnects separate access points into a single LAN. With WDS, the
interconnection no longer needs to be physically wired. WDS uses the wireless
medium to interconnect separate access points, thereby eliminating the cost and
inconvenience that may hinder wire installations.
A WDS link can be used in a simple point-to-point link, a complex
point-to-multipoint link, or a multilayer topology.
Summary of Contents for 3CRWE876075 / WL-546
