3-8
C
HAPTER
3: I
NITIAL
C
ONFIGURATION
Figure 14
Setup Wizard - Step 2
802.11a
Turbo Mode
– If you select Enable, the access point will operate
in turbo mode with a data rate of up to 108 Mbps. Normal
mode support 13 channels, Turbo mode supports only 5
channels. (Default: Disabled)
802.11a Radio Channel
– Set the operating radio channel
number. (Default: 60ch, 5.300 GHz when Auto Channel Select
is not enabled.)
Auto Channel Select
– Select Enable for automatic radio
channel detection. (Default: Enabled)
802.11b/g
Turbo Mode
- If you select Enable, the access point will operate in
turbo mode with a data rate of up to 108 Mbps. Normal mode support
11 channels, Turbo mode supports only 1 channel. (Default: Disabled)
802.11g Radio Channel
- Set the operating radio channel number.
(Range 1-11; Default: 1 when Auto Channel Select is not enabled.
Auto Channel Select
– Select Enable for automatic radio channel
detection. (Default: Enabled)
Summary of Contents for 3CRWE876075 / WL-546
