E-5
Frequency Band
(MHz)
Max Power
Level
(EIRP) (mW) Indoor
ONLY
Indoor and
Outdoor
5470–5725
1000 mW
X
Note:
Dynamic Frequency Selection and Transmit Power Control is required in the
5250- to 5350-MHz and 5470- to 5725-MHz frequency range.
EU Country Restriction in 2.4GHz band
This device may be used indoors or outdoors in all countries of the European
Community using the 2.4GHz band: Channel 1-13, except where noted below.
1) In France, the output power is restricted to 10 mW EIRP when the product is
used outdoors in the band 2454 - 2483.5 MHz. There are no restrictions
when used in other parts of the 2.4 GHz band.
EU Country Restriction in 5GHz band
1) In Italy the end-user must apply for a license from the national spectrum
authority to operate this device outdoors.
2) To remain in conformance with European spectrum usage laws for Wireless
LAN operation, the above 2.4GHz and 5GHz channel limitations apply. The
user should check the current channel of operation. If operation is occurring
outside of the allowable frequencies as listed above, the user must cease
operating the 3Com AP9152 Dual Band 802.11n PoE Access Point
(3CRWE915275, M/N :WL-607) at that location and consult the local
technical support staff responsible for the wireless network.
3) This device must be used with the radar detection feature required for
European Community operation in the 5GHz bands. This device will avoid
operating on a channel occupied by any radar system in the area. The
presence of nearby radar operation may result in temporary interruption in
communications of this device. The Access Point’s radar detection feature
will automatically restart operation on a channel free of radar. You may
consult with the local technical support staff responsible for the wireless
network to ensure the Access Point device(s) are properly configured for
European Community operation.
Europe-Restrictions for Use of 5GHz Frequencies in European Community
Countries
