32
C
HAPTER
4: R
UNNING
THE
S
ETUP
W
IZARD
Figure 18
Wireless Settings Screen
■
Wireless Network Name (SSID): The Service Set ID (SSID) is the name
of your wireless network. The SSID must be the same on the Router
and all of its wireless clients. (Default: 3Com)
■
Broadcast Wireless Network Name: Enable or disable the broadcasting
of the SSID. If you disable broadcast of the SSID, only devices that
have the correct SSID can connect. (Default: Enable)
■
Wireless Mode: This device supports the following modes -11g only,
11b only, and 11b/g mixed mode. (Default: 11b/g mixed mode)
■
Wi-Fi Channel Number: The radio channel used by the Router and its
clients to communicate with each other. This channel must be the
same on the Router and all of its wireless clients. The Router will
automatically assign itself a radio channel, or you may select one
manually. (Default: 6)
■
Extend Range: Increases the range of the Router. (Default: Disable)
Setup Wizard -
Connection Settings
The
Connection Settings
screen allows you to set up the Router for the
type of Internet connection you have. Before setting up your connection
type, have your account information from your ISP ready.
Select your connection type to proceed.
Summary of Contents for 3CRWER101A-75
