1
Use the mounting template to cut a hole for the Cat 5 cable.
2
Remove the mounting bracket from the AP3850.
3
Attach the mounting bracket to the T-bar clamp.
4
Insert the Cat 5 cable through the port connector opening in the mounting bracket,
then plug the cable into the AP3850.
840-9502-0011
840-9502-0008
T-bar
(Viewed from above ceiling tiles, looking down.)
840-9502-0005
Universal mounting
bracket
Port connector
opening
T-bar
Universal mounting bracket
840-9502-0004
Port connector
opening
840-9502-0002