2
3Com AirProtect Sentry 5850 Features
Feature
Description
1
Antenna
Connectors
Two RSMA type antenna connectors allow you to connect antennas
that operate in 2.4 GHz and 5.0 GHz bands.
2
LEDs
The LEDs indicate power and activity. See “Checking the LED
Indicators” on page 7 for details.
3
Ethernet Port
The Ethernet port provides a 10/100BASE-TX Ethernet connection to a
3Com switch. Use a suitable Category 5 cable with straight-through
signaling and standard RJ-45 connectors to connect your Sentry to the
switch on the network.
4
Serial Port
Provides a serial interface to the Sentry for diagnostic use.
5
Reset Button
To restore factory settings, press the reset button during power-up by
inserting a pointed object into the reset hole on the back of the Sentry
and holding for five seconds.
6
Kensington lock connector
7
Detachable rear-panel cover
8
Mounting Bracket
The mounting bracket comes attached to the Sentry and allows the
unit to be mounted on a wall or ceiling.
2
6
4
3
1
5
7
8
1
