IGMP Snooping Configuration
255
Multicast VLAN is mainly used in Layer 2 switching, but you must make corresponding
configuration on the Layer 3 switch.
Table 227
Configure multicast VLAN on Layer 3 switch
Operation
Command
Description
Enter system view
system-view
—
Create a VLAN and
enter the VLAN view
vlan
vlan-id
vlan-id
is a VLAN ID.
Exit the VLAN view
quit
—
Create a VLAN interface
and enter the VLAN
interface view
interface
vlan-interface
vlan-id
—
Enable IGMP
igmp enable
Required
Exit the VLAN interface
view
quit
—
Enter the view of the
Ethernet port connected
to the Layer 2 switch
interface
interface-type
interface-number
—
Define the port as a
trunk or hybrid port
port link-type
{
trunk
|
hybrid }
Required
Specify the VLANs to be
allowed to pass through
the Ethernet
port
hybrid
vlan
vlan-id-list
{
tagged
|
untagged
}
Required
The multicast VLAN defined on the
Layer 2 switch must be included
and set as tagged.
port
trunk
pvid
vlan
vlan-id
Table 228
Configure multicast VLAN on Layer 2 switch
Operation
Command
Description
Enter system view
system-view
—
Enable IGMP Snooping
globally
igmp-snooping enable
Required
Enter VLAN view
vlan
vlan-id
vlan-id
is a VLAN ID.
Enable IGMP Snooping
on the VLAN
igmp-snooping enable
Required
Enable multicast VLAN
service-type multicast
Required
Exit the VLAN view
quit
—
Enter the view of the
Ethernet port connected
to the Layer 3 switch
interface
interface-type
interface-number
—
Define the port as a
trunk or hybrid port
port link-type
{
trunk | hybrid }
—
Specify the VLANs to be
allowed to pass through
the Ethernet
port
hybrid
vlan
vlan-id-list
{
tagged
|
untagged
}
The multicast VLAN must be
included and set as tagged.
port
trunk
pvid
vlan
vlan-id
Enter the view of the
Ethernet port connected
to a user device
interface
interface-type
interface-number
interface-type interface-number
are
the interface type and interface
number.
Exit the current view
quit
—
Define the port as a
hybrid port
port link-type
hybrid
Required
Specify the VLANs to be
allowed to pass the port
port hybrid
vlan
vlan-id-list
{
tagged
|
untagged
}
Required
The multicast VLAN must be
included and set as untagged.
Summary of Contents for 4200G 12-Port
