300
C
HAPTER
35: NTP C
ONFIGURATION
CAUTION:
■
The source IP address in an NTP packet is the address of the sending interface
specified by the
ntp-service unicast-server
command or the
ntp-service
unicast-peer
command if you provide the address of the sending interface in
these two commands.
■
Dynamic connections can only be established when a switch operates in passive
peer mode, NTP broadcast client mode, or NTP multicast client mode. In other
modes, the connections established are static.
Displaying and
Debugging NTP
After the above configuration, you can execute the
display
command in any view to
display the running status of the NTP configuration, and verify the effect of the
configuration.
Configuration
Example
NTP Server Mode
Configuration
Network requirements
Configure the local clock of S4200G 1 to be NTP master clock, with the stratum being
2.
S4200G1 is a switch that allows the local clock to be the master clock.
A S4200G 1 series switch operates in client mode, with S4200G2 as the time server.
S4200G 2 operates in server mode automatically.
The 1, 2, 3, etc. destinations in the switch names are for explanation purposes only
and are not part of the command structure.
Disable the interface
from receiving NTP
packets
ntp-service in-interface disable
Optional
By default, a VLAN interface
receives NTP packets.
Display the session
information maintained
by the NTP services
display ntp-service sessions
[
verbose ]
This command can be executed in
any view.
Table 261
Configure optional NTP parameters (Continued)
Operation
Command
Description
Table 262
Display and debug NTP
Operation
Command
Display the status of NTP service
display ntp-service status
Display the information about the sessions
maintained by NTP
display ntp-service sessions
[
verbose ]
Display the brief information about the NTP
time servers of the reference clock sources that
the local device traces to
display ntp-service trace
Summary of Contents for 4200G 12-Port
